Sliding Mode Control for Trajectory Tracking of an Intelligent Wheelchair

This paper deal with a robust sliding-mode trajectory tracking controller, fornonholonomic wheeled mobile robots and its experimental evaluation by theimplementation in an intelligent wheelchair (RobChair). The proposed control structureis based on two nonlinear sliding surfaces ensuring the tracking of the three outputvariables, with respect to the nonholonomic constraint. The performances of theproposed controller for the trajectory planning problem with comfort constraint areverified through the real time acceleration provided by an inertial measurement unit

Supervisory Control Technique For An Assembly Workstation As A Dynamic Discrete Event System

This paper proposes a control problem statement in the framework of supervisory control technique for the assembly workstations. A desired behaviour of an assembly workstation is analysed. The behaviour of such a workstation is cyclic and some linguistic properties are established. In this paper, it is proposed an algorithm for the computation of the supremal controllable language of the closed system desired language. Copyright © 2001 IFAC

Event-Based PID Control of a Flexible Manufacturing Process

In most cases, the system control is made in a sampled manner, measuring the controlled value at a predefined frequency given by the sampling time. However, not all processes provide relevant information at regular intervals, especially in manufacturing. To reduce the costs and complexity of systems, event-based measuring is necessary. To control this kind of process, an event-based controller is needed. This poses some challenges, especially between the event-triggered measurement, as the process runs in an open loop. In the literature, most event-based controllers are based on the comparison of the error value with a predefined value and activate the controller if this value is crossed. However, in this type of controller, the measured value is measured at a predefine interval and is not suited for most event-based processes. In manufacturing systems, the most usual event-based process is represented by the conveyor transportation system. In this process, the product position is measured only in key locations on the conveyor. For the optimal operation of a flexible manufacturing system, the presence of a product in a key location at predetermined intervals is necessary. For this purpose, this article presents an event-based PID controller implemented on a conveyor transportation system

Mobile Visual Servoing Based Control of a Complex Autonomous System Assisting a Manufacturing Technology on a Mechatronics Line

The main contribution of this paper is the modeling and control for a complex autonomous system (CAS). It is equipped with a visual sensor to operate precision positioning in a technology executed on a laboratory mechatronics line. The technology allows the retrieval of workpieces which do not completely pass the quality test. Another objective of this paper is the implementation of an assisting technology for a laboratory processing/reprocessing mechatronics line (P/RML) containing four workstations, assisted by the following components: a complex autonomous system that consists of an autonomous robotic system (ARS), a wheeled mobile robot (WMR) PeopleBot, a robotic manipulator (RM) Cyton 1500 with seven degrees of freedom (7 DOF), and a mobile visual servoing system (MVS) with a Logitech camera as visual sensor used in the process of picking, transporting and placing the workpieces. The purpose of the MVS is to increase the precision of the RM by utilizing the look and move principle, since the initial and final positions of the CAS can slightly deviate from their trajectory, thus increasing the possibility of errors to appear during the process of catching and releasing the pieces. If the processed piece did not pass the quality test and has been rendered as defective, it is retrieved from the last station of the P/RML and transported to the first station for reprocessing. The control of the WMR is done using the trajectory-tracking sliding-mode control (TTSMC). The RM control is based on inverse kinematics model, and the MVS control is implemented with the image moments method

Digital Twin for a Multifunctional Technology of Flexible Assembly on a Mechatronics Line with Integrated Robotic Systems and Mobile Visual Sensor—Challenges towards Industry 5.0

A digital twin for a multifunctional technology for flexible manufacturing on an assembly, disassembly, and repair mechatronics line (A/D/RML), assisted by a complex autonomous system (CAS), is presented in the paper. The hardware architecture consists of the A/D/RML and a six-workstation (WS) mechatronics line (ML) connected to a flexible cell (FC) and equipped with a six-degree of freedom (DOF) industrial robotic manipulator (IRM). The CAS has in its structure two driving wheels and one free wheel (2DW/1FW)-wheeled mobile robot (WMR) equipped with a 7-DOF robotic manipulator (RM). On the end effector of the RM, a mobile visual servoing system (eye-in-hand MVSS) is mounted. The multifunctionality is provided by the three actions, assembly, disassembly, and repair, while the flexibility is due to the assembly of different products. After disassembly or repair, CAS picks up the disassembled components and transports them to the appropriate storage depots for reuse. Disassembling or repairing starts after assembling, and the final assembled product fails the quality test. The virtual world that serves as the digital counterpart consists of tasks assignment, planning and synchronization of A/D/RML with integrated robotic systems, IRM, and CAS. Additionally, the virtual world includes hybrid modeling with synchronized hybrid Petri nets (SHPN), simulation of the SHPN models, modeling of the MVSS, and simulation of the trajectory-tracking sliding-mode control (TTSMC) of the CAS. The real world, as counterpart of the digital twin, consists of communication, synchronization, and control of A/D/RML and CAS. In addition, the real world includes control of the MVSS, the inverse kinematic control (IKC) of the RM and graphic user interface (GUI) for monitoring and real-time control of the whole system. The “Digital twin” approach has been designed to meet all the requirements and attributes of Industry 4.0 and beyond towards Industry 5.0, the target being a closer collaboration between the human operator and the production line

Communication and Control of an Assembly, Disassembly and Repair Flexible Manufacturing Technology on a Mechatronics Line Assisted by an Autonomous Robotic System

This paper aims to describe modeling and control in what concerns advanced manufacturing technology running on a flexible assembly, disassembly and repair on a mechatronic line (A/D/RML) assisted by an Autonomous Robotic System (ARS), two robotic manipulators (RM) and visual servoing system (VSS). The A/D/RML consists of a six workstations (WS) mechatronics line (ML) connected to a flexible cell (FC) equipped with a 6-DOF ABB industrial robotic manipulator (IRM) and an ARS used for manipulation and transport. A hybrid communication and control based on programmable logic controller (PLC) architecture is used, which consists of two interconnected systems that feature both distributed and centralized topology, with specific tasks for all the manufacturing stages. Profinet communication link is used to interconnect and control FC and A/D/RML. The paper also discusses how to synchronize data between different field equipment used in the industry and the control systems. Synchronization signals between the master PLC and ARS is performed by means of Modbus TCP protocol and OPC UA. The structure of the ARS consists of a wheeled mobile robot (WMR) with two driving wheels and one free wheel (2DW/1FW) equipped with a 7-DOF RM. Trajectory tracking sliding-mode control (TTSMC) is used to control WMR. The end effector of the ARS RM is equipped with a mobile eye-in-hand VSS technology for the precise positioning of RM to pick and place the workparts in the desired location. Technology operates synchronously with signals from sensors and from the VSS HD camera. If the workpiece does not pass the quality test, the process handles it by transporting back from the end storage unit to the flexible cell where it will be considered for reprocessing, repair or disassembling with the recovery of the dismantled parts. The recovered or replaced components are taken over by the ARS from disassembling location and transported back to the dedicated storage warehouses to be reused in the further assembly processes